As I see it, it's just a big screen ipod touch.

I prefer having separate PC's in the background vs combined on the MBP's. Stuff just works solid this way. Too much drama on the help forums.

Having been passed on the freeway at 110 by an Insight is an eye opener. Seeing current resale value 10 years later still holding as if it was only a couple years old is simple as gold bullion. I'm impressed. The only set back could be the batteries.

If you are considering a Green Machine of present day, You should read [en.wikipedia.org]
It will brief you in the technology as it progressed.

On the other hand, a 150,000 mile test of Chrysler's design and the results would be fair.

Mid 60's, where we always had studded tires on the drive wheels. We tore up the freeways.
The whole process with snow tires would of worked if people just mounted all-season treads on all 4.
Somehow we never thought about the heavy front end with smooth tread pre-packing the snow to where the rear driven snow tires were now left to try to get traction.

Now pre-pack the snow with the same pattern as the rear snow treads and you create double the traction for rear drive. Beamers always have winter set of 4. Smart.
Regardless, with out spikes on ice, you have to have the best there is. Or it's bumper pool.

Cig lighter ports are 20amp, that can easily run a small high load air compressor. There's no way your going to smoke that connection with a laptop, and other very small devices that only consume 150 watts. Fix the real problem. It was made to light a cigarette. Which is basically a dead short device.

This is what I might have done to keep the paranoia in check.
What's weird is no one is going for a remote first to turn them back on.
Looking at the back of the set is a little retarded as if they were going to find a chimp unplugging stuff.

The main power strip should be mounted on the front of rack that faces you. {The Angled Face of Rack)

This power strip should be powered by the UPS to protect the primary devices.
(PC, External Hard Drives, Laptop, etc.)

On the other angled face of rack should be the second power strip just for generic devices such as lamps, fans, battery chargers, etc.

All cords entering the rack should be pre routed to the plug-in position on the power strip.

All excess cord length left over should be rolled up and Velcro secured to itself and rack near the position of plug on strip.

Alternate is keep the bulk left over rolled up tight behind device and Velcro strapped to self.

This advantage allows service to device so it can move to be serviced. Vs crawl under desk to deal with it being too short.

If you want to group incoming cables on the way to the rack that belong together, use the cable housing with open slit on it's entire length that simply slips over the wires.

Now at a moments notice, any device can be pulled out and not tangled in the nest of others.

It comes in different colors and diameters. And will hide phone and speaker wires as well.

Used along back edge of desk hides all inter-connected device cables. Using multiple cable housings keep the guess work controlled.

If the lamp needs to be removed, you know it's not in the PC group bundle.

Only thing visible now in the open is Cable housing leading to UPS. Unless UPS is also mounted to underside of desk.

Both Flat Screen bases were removed and screens are mounted above desktop surface on central beam. Open air space under screens is prime real estate for other devices normally in the way.

I have images of Screen Beam creation.

Secondly, the way it's presented unorganized and every folder open showing subfolders.

This makes it very difficult to find the right folder quickly.

Surely hope this has been addressed.

It would make a sexy Jacuzzi.
It almost has that Hearse look, or Whale transport.
Wind Tunnel results I'm sure are in check.

That exhaust with the side duke ports should of exited the bottom at the tip and slight upward arc opening. Oh well.

Chain Drive? Ok, back to vertical oil stained white polo shirts.
Next time get a Photographer that knows details of machinery.
The rear sprocket instead of ceiling bar joist views would of worked.

Gold & Blue? are not a match. Is it really Blue? on the frame, or bad post processing. Back to commercial art for that team.

Alternate, tank and fenders silver and gold trim instead.
Side covers work.

Rectifier tucked in at the tank works well. High & Dry, and good Air.
Put the Fins back on the heads. Mixed in like the cylinders.

At least have the options needed to get back and forth to the golf course. The headlight, as long as it works better than it looks.

They even try this on my VTX, I'll scream.

There has to be 50 java apps on any page. Hate that place.
Heavy Aperture work gets it up as well.
Internal fans are very quiet on the laptop.
External squirrel cage blower I use really keeps thing cool.

Factory workers, in toxic air 24/7.
For example, the people that make electrical tape.

Go ahead, grab that roll you used on the tower build.
Now hold the roll up to your nose.
That smell is locked in their lungs 8 - 5 everyday.
You come home, and take a second shower.
Still coming out of your lungs. It never gets normal it's so embedded.
Your family goes nuts. I wonder how I know.

A smoker's lungs are only temporarily involved.
Not constant at every breath from 8 -5.

Granted there are smarter smokers that know how to vent
the air in their world, where some have no idea, including
the building designer.

Now the diesel Truck Shop, and these same people should go
door to door to every business to make air quality safe across the board.
Not just their weasel little restaurant/bar happy hour world.
Oh Well.
As soon as we all wear air samplers with alarms, it won't be cell phones getting the new ringer download.