Senior Contributing Editors:
Jesus Diaz
| AIM | Twitter
Mark Wilson, Reviews
| AIM | Twitter
Contributing Editors:
Matt Buchanan | AIM | Twitter
Adam Frucci | Twitter
Sean Fallon | Twitter
Jack Loftus | Twitter
John Herrman | Twitter
Dan Nosowitz
Chris Mascari
Kat Hannaford | Twitter
Rosa Golijan | Twitter
Chris Jacob
I never understood why people take these into their shitty driveways to take a picture of it. Do they have little kids locked in cages inside their house and they don't want people to see?
@Sean Scrooby Grube: They probably keep them in their garage, and it's easier to wheel them out to the driveway to take a pic than to maneuver them through all the child cages in their living room to take a pic.
I built an arcade cabinet and some games for my thesis project. It was really easy and cheap. A few Happ Joysticks, Buttons, an Arduino and some software and that was it.
@monkpod:
While I commend your work I have to question the logic behind the tiny porthole screen and the low unit height considering that you and/or your friends are too tall to play that comfortably.
And here's the Arcade Coffee Table.
It cost me a whopping $200, but that because I wanted quality 2-player arcade controls from X-Arcade, which run about $100... it would probably cost less to wire your own but I lack the skills at the moment...
Whenever a friend or family member wants to throw a working old computer and CRT monitor out in the garbage (!!!!) I snag it and make and arcade :)
@Shlomo Zachary Snyder:
I've seen reviews of the X-arcade and they're not great especially at its price point. Building your own would probably run half the cost. As long as you know how to solder the wiring is dead simple (and well documented online), only tricky part is making a case for the controller but if you have the tools you can do it with some reasonable woodworking skills.
@OCEntertainment: I've built a MAME cab. and also restored a Pac-Man cab. Between the two, starting fresh is relatively easy. Make sure to learn the ins and outs of cutting MDF (the wood used in most cabinets). If memory serves you need to use a fine tooth blade to keep from getting gnarly edges. If you have a router, circular saw, and maybe a jig you should be OK.
@xcharliemx: It's supposed to mean that this may not be the website for you. I'm not usually one to jump into lovefests like this one, but really... you have a Google window on your browser. USE IT.
You mean the only time people visit arcades in the US. In Japan arcades are still very much a happening and social experience last I knew.
I'm actually disappointed that Arcades have taken such a beating over the years. As an avid pinball player I go out of my way to do business with places that still have pinball machines. My wife and I go out on Pinball Dates even.
It still depresses me that the arcade/amusement industry is in the shape that it is. It used to be a great way to hang out with friends. Now everyone just meets online to play instead, and it just isn't the same.
10/22/09
[gizmodo.com] #northkoreanarcade
10/22/09
10/22/09
10/22/09
10/22/09
09/22/09
And every foosball table should have leveling feet; less wasted coasters as impromptu shims.
09/15/09
09/15/09
09/15/09
09/14/09
09/14/09
09/12/09
At least it LOOKS like the game in the apartment of the rich guy who got whacked....
09/12/09
09/12/09
09/12/09
09/12/09
09/12/09
09/12/09
09/12/09
09/12/09
09/12/09
09/12/09
09/09/09
I built an arcade cabinet and some games for my thesis project. It was really easy and cheap. A few Happ Joysticks, Buttons, an Arduino and some software and that was it.
[rewiredpictures.com]
09/10/09
While I commend your work I have to question the logic behind the tiny porthole screen and the low unit height considering that you and/or your friends are too tall to play that comfortably.
09/09/09
09/09/09
It cost me a whopping $200, but that because I wanted quality 2-player arcade controls from X-Arcade, which run about $100... it would probably cost less to wire your own but I lack the skills at the moment...
Whenever a friend or family member wants to throw a working old computer and CRT monitor out in the garbage (!!!!) I snag it and make and arcade :)
09/10/09
I've seen reviews of the X-arcade and they're not great especially at its price point. Building your own would probably run half the cost. As long as you know how to solder the wiring is dead simple (and well documented online), only tricky part is making a case for the controller but if you have the tools you can do it with some reasonable woodworking skills.
09/09/09
My roommate and I built one earlier this year. Ran us about a grand for a 4-player, 6,500-game cabinet.
[themameproject.blogspot.com]
09/09/09
09/09/09
08/15/09
I guess I'll have to make do with plonking quarters into the Marvel vs. Capcom and Ms. Pac-Man machines at my laundromat.
08/15/09
Love arcade games - I have a fully restored Defender from 1980 - beats an Xbox any day!
08/15/09
08/15/09
You rat-bastard!
08/16/09
08/16/09
08/15/09
08/15/09
08/15/09
+1
That website is much better than - [justfuckinggoogleit.com]
However, I will never (again) click on a "Let me Google that for you" link. (Not after [lmgtfy.com] SFW)
08/15/09
06/30/09
I'm actually disappointed that Arcades have taken such a beating over the years. As an avid pinball player I go out of my way to do business with places that still have pinball machines. My wife and I go out on Pinball Dates even.
It still depresses me that the arcade/amusement industry is in the shape that it is. It used to be a great way to hang out with friends. Now everyone just meets online to play instead, and it just isn't the same.