Vote 2020 graphic
Everything you need to know about and expect during
the most important election of our lifetimes

The Lanmodo Night Vision System Made Me Feel Like I Was Driving With Pricey Superpowers

Illustration for article titled The Lanmodo Night Vision System Made Me Feel Like I Was Driving With Pricey Superpowers
Photo: Carlos Zahumenszky (Gizmodo)

The Lanmodo Night Vision system won’t turn your car into the Batmobile, but it definitely has that halo of techno-magic worthy of a Batman comic. It’s a night vision system in color for your car. It literally turns night into day and is so easy to use that you don’t even have to professionally install it. Which is great, because it’s awfully expensive for what you get.


Germany, which is where I live, is very aware of light pollution and a big energy saver—which is a nice way of saying its highways are darker than a cricket butt. Not even the highways with a significant amount of traffic are lit up. When you go from one town to another you depend on your car lights, and sometimes that’s not enough. So you can see why the Lanmodo Night Vision system was awfully appealing to me.


The Lanmodo Night Vision system is a gadget the size of a rearview mirror, but instead of having a mirror, it has an 8.2-inch Full HD screen. On the other side you’ll find a camera similar in size to a webcam. The camera is nested inside a swivel that allows you to reposition the lens to better frame the highway in front of you regardless of where you install it. A single OBD cable juts out of the back of the device.

In terms of controls, there are only seven buttons on the top (or on the bottom if you decide to install it on your windshield like a rear view mirror substitute). At first, I was a bit disappointed at this simplicity, but over time I have to admit that it’s a win.

Easy to use, easy to install

The installation is one of the best things about the Lanmodo Night Vision system. Normally, car accessories tend to require complex set-ups and possibly even a trip to a professional installer. However, you can install this like you would install a GPS system. Just plug and play. If you know about car electronics, you can pass the cable underneath the dashboard and connect it to the car’s OBD cable for a neat install. But it’s nice to have the option of just plugging it into the lighter outlet. You mount it either on the inside of your windshield with a suction cup or on the dashboard with a non-slip mat. Both accessories come in the box and work wonderfully.


The ease of the installation also extends to use. The moment you plug it in and turn on the car, the Lanmodo Night Vision system activates by itself and you’re. It recognizes ambient light by itself and selects the best image mode automatically. The only time you really have to fiddle with set up is if you have it mounted on the windshield. In that case, you have to turn the image upside down, but it’s a 10-second process.


The top buttons, besides turning the system on and off, allow you to adjust the brightness and contrast on the screen and rotate the image depending on your installation choice. Another button lets you alternate between the front and the optional $100 rear camera. The model I tried didn’t have that accessory, so this button didn’t do anything for me.

The last button lets you toggle the image between black and white and color. The Lanmodo Night Vision screen actually combines two images being captured by its camera. It gets the first image from a Sony MCCD sensor that magnifies the light, and the second image from an infrared sensor. When there’s little ambient light, the color information can disappear and switching to infrared only might be preferable.

On the top, you can see the image in color. Below it, you can see the image in black and white at 480p that appears when you completely turn off your car lights. Can you see the cat?
On the top, you can see the image in color. Below it, you can see the image in black and white at 480p that appears when you completely turn off your car lights. Can you see the cat?
Photo: Carlos Zahumenszky (Gizmodo)

But the Landmodo Night Vision will automatically switch to infrared only if it detects zero external light (say if you turn off your lights on a dark highway). The image automatically changes to black and white and the Lanmodo Night Vision system trusts in the information that it receives from the infrared sensor. However, the infrared sensor doesn’t capture as high a resolution as the other, and image quality will drop from 1080p to 480p. But again, this only happens if you’re in the most absolute and complete darkness, without sources of external light and with the car lights off. I can think of very limited situations where this should happen in the real world. Unless you dedicate your time to hunting deer from your car you should be fine.


Using the Lanmodo Night Vision system

By day, the image quality is excellent and there’s no signal delay that could make it uncomfortable or dangerous to use. Driving while trying to use only the information on the screen is possible (at low speeds), but it is not advisable, and possibly not even legal in your state. Perhaps if you install it right in front of the steering wheel it could work, but don’t do that! Keep your eyes on the road please.


One interesting feature that I haven’t been able to try out yet due to the weather is its ability to improve visibility in thick fog or heavy rain. I’ll update this review the next time I get some rain.


At night, the system offers an amazing amount of extra information over what my own eyes and headlights provide. It has a 36-degree viewing angle and reach of about 985 feet. In general, what it does is highlight the dark points on the road so I can better see animals or other objects outside the range of my headlights.


On one of my test drives, I was driving slowly down country road without lights when the screen showed a dark object moving towards the front of the car. It was a cat. I flipped on the lights and still couldn’t see it with my own eyes. I could only see that little buddy on the screen.


The only problem the system had when I used it at night was that the lights from the other cars are even more blinding on the screen, but you can greatly improve the situation by reducing the brightness.


The Lanmodo Night Vision system isn’t for everyone. If you always drive on well-lit streets and your car has good rear lights, you don’t need a system like this one. However, if your car is like mine (an old 2008 Ford Focus) or you live in a less than the well-lit area you can probably get a lot of use out of it or something like it (similar gadgets can be found on both Amazon and Aliexpress). The ideal users for this gadget are people who live in the country and frequently have to drive on streets with no light, or even on roads that aren’t even paved. If you’re a forest engineer or you have a farm, it’s very likely that the Lanmodo Night Vision system will change your driving life.


But at $500 (and $600 if you include the rear camera) it’s hard to justify the Lanmodo Night Vision system right now. It’s way too simple for the price! That simplicity is marvelous to avoid distractions while you drive, but I can’t help thinking that it could have a few more features to justify its price tag. It’s also due for an upgrade as later this year, Lanmodo will launch an Indiegogo Campaign for a new generation of its Night Vision System. We will get our hand on that new device so you can compare better between the two. But for now it’s probably a good idea to hold off—unless you really live in absolute darkness.


  • Very good image quality at night as well as during the day.
  • It’s extremely easy to use and install.
  • It doesn’t have a lot of functions. It helps you see better when you drive at night. That’s all.
  • It has a quite high price for what it offers.

This review originally appeared in Gizmodo en Español. You can read it in Spanish here.

Share This Story

Get our newsletter


I’m a little confused at the use here since you are not supposed to be driving exclusively with the camera. For the example where you spotted the cat.. did you park your car & switch between full-color mode & black and white mode just for the demonstration?

If i’m driving on the highway at speed trying to avoid a deer.. would I be constantly driving in night vision mode & just darting my eyes back & forth between the windshield & the device screen?

(thanks for the review btw! I’m not criticizing, i’m just trying to picture the actual workflow on a highway)